1. <span id="z91vf"><pre id="z91vf"><sup id="z91vf"></sup></pre></span>

    <rp id="z91vf"><ruby id="z91vf"><input id="z91vf"></input></ruby></rp>
    Welcome to Huizhou Zhengwei Coating Co.,Ltd.!
    Home|Ebook|Backstage|Email

    Products ---- Wood UV coatings

    UV roller paste transparent Primer

    Code Product name Characteristics
    UVF-3001 UV roller paste transparent Primer low viscosity,, Good levelling, high transparency
    UVF-3002 UV roller paste transparent Primer medium viscosity, good filling capacity
    UVF-3003 UV roller paste transparent Primer high viscosity, good filling capacity, high hardness
    UVF-3005 UV roller paste transparent Primer cost-saving, medium viscosity, good filling and Leveling property

    Uses: coating of Solid wood or Veneer board sticking furniture, Bamboo and wood floor, MDF Top-coat before construction, Has some filling capacity and grinding resistance, the offer Top-coat flat base surface. The reasonable construction of UV Primer can ensure the hardness and fullness of Top-coat.

    Construction method: roller paste

    Dosage: 20-35g/m2

    Construction procedure: white board→water-based dyeing →UV Putty →UV roller paste Primer →UV roller paste Primer (sand polishing)→UV intermediate-coating dyeing (or PU color fixing )→UV roller paste matter clear Top-coat (or spraying PU Top-coat)

    Cured Control:

    ① need half-light and do not sand polishing, direct 's coating subsequent UV Primer, the requirements for the surface film of cured non-tacky, fingernail scratches.

    ② when needed sand polishing, paint to the surface to be cured without fingernail scratches.

    Packing and storage: 20KG, Stored in a cool, dry and well-ventilated place; avoid direct sunlight and far away from fire; Shelf life is 6 months..

    Precautions:

    ① oil of more board material (such as rosewood, teak, pine, etc.) should do first seal oil treatment and further conducting UV Putty or UV Primer of 's coating, otherwise it will affect' s coating effect.

    ② ordinary water-based dyeing agent only superficial dyeing, dyeing the water will then be sufficiently volatile UV Putty and UV Primer of 's coating, otherwise it will affect Adhesion. Dyeing agent is not free to add them to this product, and if you need to add test feasibility.

    ③ through energy UV lamp to adjust the degree of cured UV Putty. Cured insufficient influence sand polishing, post-cured hardness is too high and may affect subsequent UV coating adhering. If you follow when spraying PE or PU paint can dry completely.

    ④ Stir in use should be preceded.

    ⑤ This product is flammable items, should pay attention to the fire, to keep construction ambient air circulation.

    ⑥ The product has a light cured properties, avoid direct sunlight during use.

    ⑦ Avoid contact with skin and eyes, if they inadvertently come into contact with skin and eyes, immediately rinse with plenty of water.

    [ Close ]

    Huizhou Zhengwei Coating Co.,Ltd.

    Add: Yongping Development Park, Tonghu Town, Huizhou, China

    Tel: 0086-752-3891901 / 3891902      Fax: 0086-752-3891828

    E-mail: hzzwtl@163.com                      Url: www.samanthijayasuriyabcba.com

    • Micro station
    • Mobile version
    Copyright(C)2015, Huizhou Zhengwei Coating Co.,Ltd. All Rights Reserved. Supported by ChemNet ChinaChemNet Toocle Copyright Notice
     
     
     
     
     
    性欧美大战久久久久久久免费观看_欧美成a高清在线观看_久久精品麻豆日日躁夜夜躁_国内精品久久久久久久影视麻豆
    1. <span id="z91vf"><pre id="z91vf"><sup id="z91vf"></sup></pre></span>

      <rp id="z91vf"><ruby id="z91vf"><input id="z91vf"></input></ruby></rp>